After the car is used for a long time, it is prone to a variety of faults. One of the faults is that the separation bearing is broken and the performance of the separation bearing is broken. Many car owners can not find it. The small editor came to introduce to you several kinds of separation of the performance of the bearing and the reasons for the broken, everyone take a look.
Reasons for the failure of separate bearings: Phenomenon
The neutral sound is normal. There is a rustling sound when stepping on the clutch. When driving with the gear, there is a silky sound similar to metal friction. It doesn't affect normal driving, but there's a sound.
Reasons for the failure of separate bearings: Maintenance
(1) According to the operating regulations, avoid the semi-joint and semi-separation of the clutch and reduce the number of clutch operations.
(2) Take care of maintenance, remove separate bearings and remove impurities regularly or during inspection and maintenance, and immerse the lubricant by cooking to make it have a permissible lubricant.
(3) Pay attention to the separation lever of the Yuanping clutch to ensure that the spring spring spring is in compliance with regulations.
(4) Rinse the free stroke to make it meet the requirements(35-45mm). Prevent too large or too small free trips.
(5) Minimize the number of joints and separations and reduce impact loads.
(6) Easy to step on, easy to move the foot from the clutch pedal, so that its A. Steady joint and separation.
(7) If the separation bearing is badly worn or burned, it is recommended to replace it with a new one and fully lubricate it before installation.
The above is the content introduced to everyone by the small editor. The small editor introduced to everyone the performance of the broken separation bearings and the maintenance and solution when they are commonly used. When we encounter similar situations, we can solve them very well. It will not be a fault expansion. I hope the introduction will help.