This unique variable contact design for clutch separation bearing seals allows maximum speed, wear resistance, long service life under maximum load, and minimizes noise and vibration. In addition, the Dong Sheng seal tells you that its self-adjusting center design allows the clutch separation bearing to control the clutch state and the clutch transmission system components are incorrect. Clutch separation bearings also have a unique sealing system that insulates pollutants while retaining grease.

Feature one:

1, by rolling the outer ring, provide multiple installation solutions for two bearing rings;

Elastic materials specially prepared according to the speed and temperature of the application;

3, throughout the bearing life has excellent oil retention, reduce friction, have excellent wear protection performance;

The lip seal is designed with advanced materials and a sealed lip to provide lower friction and a good discharge function, thereby extending its service life. The Dong Sheng seal tells you that you can choose to integrate the magnetic trigger wheel in the sealing system to provide a signal for the anti-lock braking system.

Features 2:

1, independent axial dust-proof lip;

2, radial sealing lips and oily lips;

3, the traditional sealing lip configuration;

4, stainless steel oil throwing ring as the seal running surface;

5, elastic materials for friction optimization;

Low friction to reduce power loss and carbon dioxide emissions;

7, with superior decontamination and lipids ability to achieve a longer life of the bearing

The main advantage of the main pin seal is that it can eliminate the frequent lubrication usually required by the main pin of the steering shaft. Another advantage of the sensor may be that it can be used in modern steering systems, which usually do not retain the added grease.

Features 3:

1, a variety of sealing lip design, such as lips, single lips, the entire bearing life has excellent oil retention force;

(2) Bushing with rubber seal and ring gasket for assembly;

3, specially configured sealed lip, and its surface with PTFE coating;

4, applicable to different customers and service requirements of special assembly functions, easy to install and disassemble during the maintenance process;