Separation lever inner end is of different height, the clutch joint will be jitter phenomenon, the car can not start smoothly. Therefore, when assembling and maintaining, it is necessary to view the contact between the inner end of each separation lever and the separation bearing, and require that the inner end of each separation lever be in the same plane, and the error should comply with the original regulations, and generally not more than 0.25 mm. If the requirements are not met, adjustments are made. The method is to adjust the separation lever inner end or adjust the nut at the outer end. The adjustment method for the height of the separation lever of the EQ1092 vehicle is to loosen the lock nut with a wrench, rotate clockwise to separate the lever adjusting nut, and separate the inner end of the lever; Conversely, the internal end of the separation lever is reduced. The lock nut should be tightened after adjustment.

Membrane spring separation means that it must be evenly arranged on the circumference, and its limit deviation is not more than 0.5 mm. At the same time, the height of each spring separation finger should be on the same horizontal plane, and the error should not be greater than 0.5 mm. If the spring separation refers to uneven, it will make the car start unstable, shaking, and the clutch can not be completely separated.